Model No.: EPS-12020
This system is a suitcase-contained unit providing the ultimate ease of use, portability, and component storage. All pneumatic components are affixed to the steel plates which are mounted to the suitcase. It is specifically designed to give practical and in-depth knowledge of Pneumatics, preparing students for entry into the industry.
Feature:
1. Portable
2. Rugged construction
3. Push-fit connectors
4. Wide range assignments
5. Genuine industrial components
Specifications:
1. Power supply unit x 1:
a. Input Power: 120/240 VAC
b. Overload fuse protection
c. 10 sets of binding posts for DC24V output (Max. 4.5A)
2. Relay unit x 5:
a. DC24V with LED light
b. Each relay controls up to 4 sets of NO/ NC points
3. Pushbutton x 2:
a. One in red and one in green
b. control NO/NC points
4. Emergency stop switch x 1:
a. Mushroom twist-to-release actuator
b. Red indicator light
c. Controls all NO/NC points
5. Reset switch x 1
a. Orange indicator light
b. Controls all NO/ NC points
6. Digital timer x 1
a. Range: 0~99 sec
b. Controls one set of NO and one set of NC points
7. Digital counter x 1
a. Range: 0 ~ 999 counts
b. Controls one set of NO and one set of NC points
8. 3-port, 2-position, single solenoid valve x 1
a. One spring return operation
b. One 24VDC solenoid coil operation
9. 3-port, 2-position, double solenoid valve x 1
a. Double solenoids provide two-position, energize open/ energize closed operation.
b. DC 24V coils
10. 5-port, 2-position, single solenoid valve x 1
a. One spring return operation
b. One 24VDC solenoid coil operation
11. 5-port, 2-position, double solenoid valve x 2
a. Double solenoids provide two-position, energize open/ energize closed operation.
b. DC 24V coils
12. 5-port, 3-position, center closed, double solenoid valve x 1
a. 24 VDC solenoid coils
b. Spring return
13. 5-port, 3-position, center exhaust, double solenoid valve x 1
a. 24 VDC solenoid coils
b. Spring return
14. 5-port, 3-position, center open, double solenoid valve x 1
a. 24 VDC solenoid coils
b. Spring return
15. Pressure switch x 1
a. Controls 1 positive pressure NO point
b. Controls one negative pressure NO point
16. Limit switch x 4
a. Controls one NO and one NC points
b. Triggered by cylinder DOG
Optional Cylinder Set (EPS-12020A)
EPS-12020 can not be operated alone. If you do not have BPS-12010, you will need to purchase the optional cylinder set (EPS-12020A).
Experiments:
1.Single-button, single solenoid valve control
2.Single-button, single solenoid valve energize open/ close control
3.Single solenoid valve, single loop control
4.Single solenoid valve, multiple loops control
5.Single solenoid valve, time-delay loop control
6.Single solenoid valve, time-delay, multiple loops control
7.Dual-button, double solenoid valves control
8.Double solenoid valves, limit switches, single loop control
9.Double solenoid valves, multiple loops control
10.Double solenoid valves, time-delay loop control
11.Double solenoid valves, single loop control
12.Double solenoid valves, time-delay multiple loops control
13.Single-button, double solenoid valves control
* Optional PLC control module available